Micromech

CSD MT – Boxed, Stepping Motor Drive

  • Series of stepping motor drives with Modbus TCP/IP interface.
  • Drives optimized for coupling with SANYO DENKI stepping motors, fitted with encoder.
  • Compact system, developed to offer a wide variety of integrated functions and optimized for the most demanding motion control applications.
Introduction
  • Series of stepping motor drives with Modbus TCP/IP interface.
  • Drives optimized for coupling with SANYO DENKI stepping motors, fitted with encoder.
  • Compact system, developed to offer a wide variety of integrated functions and optimized for the most demanding motion control applications.
Highlights
  • Communication by means of Modbus TCP/IP interface.
  • Modes of operation: PP, PV and Homing.
  • Full digital microstepping drive.
  • Extremely compact size.
  • A highly sophisticated operation system, preserving anyhow the traditional ease of use of R.T.A. drives.
  • UL recognized.
Technical Specifications
  • Version: drive housed in a plastic box 130 x 106 x 32 mm, equipped with plug-in connectors.
  • Range of operating voltages: 24-48 VDC.
  • Nominal current.: 4 Amp.
  • Protections:
    - Protection against under-voltage and over-voltage.
    - Protection against a short-circuit at motor outputs.
    - Overtemperature protection.
  • Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
  • Optoinsulated auxiliary and programmable inputs and outputs.
  • Warranty: 24 months.
Model Name Drive Type Bus Voltage Range (Volt.) Phase Current Range (Amp.)  Dimensions (mm.) Suggested Motors (Flange size) 
CSD MT S4 Modbus TCP/IP 24 - 48 VDC 4.0 Box 130 x 106 x 32 mm Plug_in connectors NEMA 11, NEMA 17, NEMA 23, 60 mm
CSD MT 94 Modbus TCP/IP 24 - 48 VDC 4.0 Box 130 x 106 x 32 mm Plug_in connectors NEMA 11, NEMA 17, NEMA 23, 60 mm

 

Downloads

Catalogue