Micromech

R.T.A.

A complete range of stepping motor drives featuring more than 60 models, divided into six main typologies: Step&Direction, Step&Direction Advanced, Analog Input, Programmable, CanOpen, EtherCAT

As distributors for R.T.A, we are able to supply R.T.A Stepping Drives and Sanyo Denki Stepping Motors.  Contact our sales team on 01376 333333 or sales@micromech.co.uk for price and delivery or technical assistance.

RTA Sanyo Denki
Step and Direction
  • Ministep bipolar chopper drive, open frame or boxed version.
  • Bus voltage range: 24Vdc – 180Vdc and 24Vac – 230Vac.
  • Phase Current Range: 0,6 – 12Amp.
  • Versions with direct input from the main AC power supply.
  • UL/CSA certified version.
  • Availability of motor loss of synchronism control function.
Programmable
  • Drive with on board programable motion controller. 
  • Communication through RS 485 serial line.
  • Versions with direct input from the main AC power supply.
  • Availability of motor loss of synchronism control function.
  • Bus voltage range: 28Vac – 230Vac.
  • Phase Current Range: 2,3 – 8Amp.
Step and Direction Advanced
  • Ministep bipolar chopper drives, with Adaptive microstepping up to 12.800 step/rev and intelligent management of the current profile to achieve optimal motor smoothness and lowest noise.
  • Bus voltage range: 24Vdc – 180Vdc and 24Vac – 230Vac.
  • Phase Current Range: 0,6 – 6 Amp.
  • Direct input from the main AC power supply version.
CANopen
  • Motor drive combo unit with CanOpen interface.
  • Incremental or absolute encoder function.
  • UL/CSA verified version.
  • Bus voltage range: 24Vdc – 85Vdc.
Analog Input
  • Drives controlled with Analog input for the setting of motor target speed.
  • Possibility of management by programmable motion controller.
  • Intelligent management of the current profile to achieve optimal motor smoothness and lowest noise.
  • Bus voltage range: 24Vdc – 180Vdc and 24Vac – 230Vac.
  • Phase Current Range: 0,6 – 8Amp
Ethercat
  • Drives with ETHERCAT interface.
  • Modes of operation: PROFILE POSITION and CSP; different variety of HOMING.
  • Possibility to manage stepper motors with and without encoder.
  • I/O embedded.
  • Version with direct input from the main AC power supply.
  • Bus voltage range: 24Vac – 85Vdc e 28 – 230Vac.
  • Rated currents up to 6Amp; current overboost (120%)