Micromech

FLEX-DRIVE

FLEX-DRIVE  is an ultra-slim EtherCAT stepping motor drive, that perfectly fits the TRIO MOTION Flexslice architecture, creating a powerful multi-axis modular system.

Introduction

FLEX-DRIVE  is an ultra-slim EtherCAT stepping motor drive, that perfectly fits the TRIO MOTION Flexslice architecture, creating a powerful multi-axis modular system.

Highlights

  • Coupling with stepping motors up to Nema 24 (60 mm) with feedback.
  • Mode of operation: PP, CSP, CSV, Homing
  • Easy setup: no need of programming software; all settings are made through EtherCAT network.
  • Separated power supply for logic circuit and motor power.

Technical Specifications

  • Version: drive housed in a plastic box 147x17x107 mm, equipped with spring connector.
  • Range of operating voltages: 24-48 VDC.
  • Nominal current.: 4 Amp.
  • Protections:
    -Protection against under-voltage and over-voltage.
    -Protection against a short-circuit at motor outputs.
    -Overtemperature protection.
  • Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
  • Warranty: 24 months.

 

Model Name Drive Type Bus Voltage Range (Volt.) Phase Current Range (Amp.)  Dimensions (mm.) Suggested Motors (Flange size) 
FLEX-DRIVE MSB-204 EtherCAT 24 - 48 VDC 2.5 147x17x107 NEMA 11, NEMA 17, NEMA 23, 60 mm
FLEX-DRIVE MSE-408
EtherCAT 24 - 48 VDC 4.0 147x17x107 NEMA 11, NEMA 17, NEMA 23, 60 mm with encoder

Downloads

Catalogue