Heidenhain RSF – Exposed Linear Encoder – MS
Increasing requirements in today’s motion control applications ask for high-precision exposed linear encoder systems. This is driven by steadily increasing demands for higher traversing speed, higher operating cycles, lower mechanical backlash and zero frictional force induced by the encoder. Only exposed, non-contact encoders fulfill all these requirements. Exposed encoders are optimized and commonly used in clean environments
MS 15
- Small dimensions
- System resolution: 10 µm - 0.05 µm
- Display of the signal quality directly at the scanning head via 3-coloured LED function
- Easy mounting without additional test box
- Easy mounting as a result of large mounting tolerances
- High insensitivity to contamination by use of an extensive singlefield scanning principle
- Interface: TTL, sinus 1 Vpp
- High permissible traversing speed
- Reference mark (accurate and repeatable from both traversing directions)
- Position selectable by customer
- Integrated subdividing electronics in the encoder head: for up to times 200 interpolation (before quadrature)
- Max. measuring length: 20 000 mm
- Two independent switch signals (optical) for individual special functions
MS 25
- Standard dimensions
- System resolution: 2 µm - 0.1 µm
- Display of the signal quality directly at the scanning head via 3-coloured LED function
- Easy mounting without additional test box
- Easy mounting as a result of large mounting tolerances
- High insensitivity to contamination by use of an extensive singlefield scanning principle
- Interface: TTL, sinus 1 Vpp
- Signal-immunity against aging and temperature changes
- High permissible traversing speed
- Reference mark (accurate and repeatable from both traversing directions)
- Integrated subdividing electronics in the encoder head: for up to times 200 interpolation (before quadrature)
- Max. measuring length: 20 000 mm
- Optional: two independent switch signals (optical) for individual functions
- Optional: position of reference mark customizable
- Optional: one switch signal for special functions
MS 45
- Flat dimensions
- System resolution: 10 µm - 0.5 µm
- Display of the signal quality directly at the scanning head via 3-coloured LED function
- Easy mounting without additional test box
- Easy mounting as a result of large mounting tolerances
- High insensitivity to contamination by use of an extensive singlefield scanning principle
- Interfaces: TTL, sinus 1 Vpp
- Signal-immunity against aging and temperature changes
- High permissible traversing speed: 15 m/s
- Reference mark (accurate and repeatable from both traversing directions)
- Integrated subdividing electronics in the encoder head: for up to times 100 interpolation (before quadrature)
- Max. measuring length: 30 000 mm
- Flat dimensions
- System resolution: 10 µm - 0.5 µm
- Display of the signal quality directly at the scanning head via 3-coloured LED function
- Easy mounting without additional test box
- Easy mounting as a result of large mounting tolerances
- High insensitivity to contamination by use of an extensive singlefield scanning principle
- Interfaces: TTL, sinus 1 Vpp
- Signal-immunity against aging and temperature changes
- High permissible traversing speed: 15 m/s
- Reference mark (accurate and repeatable from both traversing directions)
- Integrated subdividing electronics in the encoder head: for up to times 100 interpolation (before quadrature)
- Max. measuring length: 30 000 mm
